Acetabular component liner exchange with highly crosslinked polyethylene for wear and osteolysis.

Aims: Isolated acetabular liner exchange with a highly crosslinked polyethylene (HXLPE) component is an option to address polyethylene wear and osteolysis following total hip arthroplasty (THA) in the presence of a well-fixed acetabular shell. The liner can be fixed either with the original locking mechanism or by being cemented within the acetabular component. Whether the method used for fixation of the HXLPE liner has any bearing on the long-term outcomes is still unclear. Methods: Data were retrieved for all patients who underwent isolated acetabular component liner exchange surgery with a HXLPE component in our institute between August 2000 and January 2015. Patients were classified according to the fixation method used (original locking mechanism (n = 36) or cemented (n = 50)). Survival and revision rates were compared. A total of 86 revisions were performed and the mean duration of follow-up was 13 years. Results: A total of 20 patients (23.3%) had complications, with dislocation alone being the most common (8.1%; 7/86). Ten patients (11.6%) required re-revision surgery. Cementing the HXLPE liner (8.0%; 4/50) had a higher incidence of re-revision due to acetabular component liner-related complications than using the original locking mechanism (0%; 0/36; p = 0.082). Fixation using the original locking mechanism was associated with re-revision due to acetabular component loosening (8.3%; 3/36), compared to cementing (0%; 0/50; p = 0.038). Overall estimated mean survival was 19.2 years. There was no significant difference in the re-revision rate between the original locking mechanism (11.1%; 4/36) and cementing (12.0%; 6/50; p = 0.899). Using Kaplan-Meier survival analysis, the revision-free survival of HXLPE fixed with the original locking mechanism and cementing was 94.1% and 93.2%, respectively, at ten years, and 84.7% and 81.3%, respectively, at 20 years (p = 0.840). Conclusion: The re-revision rate and the revision-free survival following acetabular component liner exchange revision surgery using the HXLPE liner were not influenced by the fixation technique used. Both techniques were associated with good survival at a mean follow-up of 13 years. Careful patient selection is necessary for isolated acetabular component liner exchange revision surgery in order to achieve the best outcomes.

Long-term polyethylene wear rates and clinical outcomes of oxidized zirconium femoral heads on highly cross-linked polyethylene in total hip arthroplasty.

Aims: Oxidized zirconium (OxZi) and highly cross-linked polyethylene (HXLPE) were developed to minimize wear and risk of osteolysis in total hip arthroplasty (THA). However, retrieval studies have shown that scratched femoral heads may lead to runaway wear, and few reports of long-term results have been published. The purpose of this investigation is to report minimum ten-year wear rates and clinical outcomes of THA with OxZi femoral heads on HXLPE, and to compare them with a retrospective control group of cobalt chrome (CoCr) or ceramic heads on HXLPE. Methods: From 2003 to 2006, 108 THAs were performed on 96 patients using an OxZi head with a HXLPE liner with minimum ten-year follow-up. Harris Hip Scores (HHS) were collected preoperatively and at the most recent follow-up (mean 13.3 years). Linear and volumetric liner wear was measured on radiographs of 85 hips with a minimum ten-year follow-up (mean 14.5 years). This was compared to a retrospective control group of 45 THAs using ceramic or CoCr heads from October 1999 to February 2005, with a minimum of ten years' follow-up. Results: Average HHS improved from 50.8 to 91.9 and 51.0 to 89.8 in the OxZi group and control group, respectively (p = 0.644), with no osteolysis in either group. Linear and volumetric wear rates in the OxZi group averaged 0.03 mm/year and 3.46 mm3/year, respectively. There was no statistically significant difference in HHS scores, nor in linear or volumetric wear rate between the groups, and no revision for any indication. Conclusion: The radiological and clinical outcomes, and survivorship of THA with OxZi femoral heads and HXLPE liners, were excellent, and comparable to CoCr or ceramic heads at minimum ten-year follow-up. Wear rates are below what would be expected for development of osteolysis. OxZi-HXLPE is a durable bearing couple with excellent long-term outcomes.

From breast cancer cell homing to the onset of early bone metastasis: The role of bone (re)modeling in early lesion formation.

Breast cancer often metastasizes to bone, causing osteolytic lesions. Structural and biophysical changes are rarely studied yet are hypothesized to influence metastasis. We developed a mouse model of early bone metastasis and multimodal imaging to quantify cancer cell homing, bone (re)modeling, and onset of metastasis. Using tissue clearing and three-dimensional (3D) light sheet fluorescence microscopy, we located enhanced green fluorescent protein-positive cancer cells and small clusters in intact bones and quantified their size and spatial distribution. We detected early bone lesions using in vivo microcomputed tomography (microCT)-based time-lapse morphometry and revealed altered bone (re)modeling in the absence of detectable lesions. With a new microCT image analysis tool, we tracked the growth of early lesions over time. We showed that cancer cells home in all bone compartments, while osteolytic lesions are only detected in the metaphysis, a region of high (re)modeling. Our study suggests that higher rates of (re)modeling act as a driver of lesion formation during early metastasis.

Heterotopic ossification, osteolysis and implant failure following cervical total disc replacement with the M6-C™ artificial disc.

INTRODUCTION: A recent study reported a 34% mid-term revision rate after M6-C™ cervical total disc replacement (CTDR) for wear-related osteolysis. Here, we aim to investigate the prevalence, risk factors, and radiographic characteristics of periprosthetic bony changes and implant failure of the M6-C™ artificial disc. METHODS: We retrospectively analysed radiographic (conventional X-ray, CT scan) and clinical outcomes (EQ-5D-5L, Neck Disability Index (NDI), and Visual Analog Scale (VAS) for neck and arm pain) data collected during routine follow-up of patients who underwent CTDR with the M6-C™ between 2011 and 2015. RESULTS: In total, 85 patients underwent CTDR with the M6-C™. Follow-up data were available for 43 patients (54% female, mean age 44 years) with 50 implants and a mean follow-up of 8.1 years (6.5-11 years). Implant failure with the presence of severe osteolysis was identified in 5 (12%) patients who were all male (p = 0.016) and implanted at the C5/6 level (p = 0.11). All failed implants required revision surgery. The overall prevalence of osteolysis was 44% (22/50 implants) and 34% (17/50 implants) for significant heterotopic ossification. Patients with high-grade osteolysis showed higher VAS arm pain (p = 0.05) and lower EQ-5D-VAS health VAS (p = 0.03). CONCLUSION: We report a lower reoperation rate for failed M6-C™ implants than previously published, but confirmed that osteolysis and heterotopic ossification are common following CTDR with the M6-C™ and may be asymptomatic. Therefore, we strongly recommend ongoing clinical and radiographic monitoring after CTDR with the M6-C™, particularly for male patients implanted at the C5/6 level.

Outcomes of Total Ankle Arthroplasty After Periprosthetic Cyst Curettage and Bone Grafting.

Total ankle arthroplasty (TAA) has become a popular management option for ankle arthritis. Periprosthetic osteolysis is one of the most common causes for reoperation in TAA. A CT scan should be done in all suspected osteolysis cases to confirm location, quantify size and aid in surgical planning. These patients are often asymptomatic with limited evidence regarding appropriate management. Smaller lesions should be monitored for progression in size. Periprosthetic cysts measuring 10-15mm in all three axes should be considered for debridment and curettage with autogenous bone grafting. The authors believe that bone grafting of large asymptomatic periprosthetic cysts could prevent implant failure.

Corrosion of a Fassier-Duval Telescopic Nail Causing Pain and Osteolysis: A Case Report.

CASE: A 15-year-old girl known with osteogenesis imperfecta presented with left femoral pain. She had been treated with multiple Fassier-Duval intramedullary nails, which were still in situ. Radiographic imaging demonstrated focal osteolysis and periosteal reaction at the telescopic junction of the rod in the distal femur. She underwent implant removal. Intraoperative sampling demonstrating acute sterile inflammation and presence of brownish colored particles consistent with metal debris and osteolysis. Explant analysis confirmed corrosion of the stainless-steel telescopic nail as the underlying cause. CONCLUSION: Osteolysis and periosteal reaction because of corrosion should be considered in conjunction with other more common causes of pain, such as fracture or infection, in patients treated with telescopic intramedullary nails.

Factors affecting stress shielding and osteolysis after reverse shoulder arthroplasty: A multicenter study in a Japanese population.

BACKGROUND: Stress shielding and osteolysis around the humeral stem after reverse shoulder arthroplasty causes loosening and periprosthetic fractures and reduces bone stock during revision surgery. In Japanese patients, who have relatively small bodies, different characteristics may exist regarding the occurrence of these changes compared with the characteristics of Westerners, who have relatively larger frames. The purpose of this multicenter study was to investigate the incidence and clarify the predictors of stress shielding and osteolysis in Japanese individuals who underwent reverse shoulder arthroplasty. METHODS: The occurrence of stress shielding and osteolysis was investigated in 135 shoulders that had undergone reverse shoulder arthroplasty at least 2 years prior in five Japanese hospitals. During post-surgical follow-up, which was conducted every 3 months, the locations of the stress shielding occurrences, such as cortical thinning and osteopenia (which primarily occurred in zones 1, 2, and 7, where 1 is the greater tuberosity and 7 is the calcar part), spot weld, and condensation lines, were recorded. Cases without any abnormal findings on radiographs obtained up to ≥2 years after surgery were regarded as having no abnormalities. Finally, the predictors of cortical thinning and proximal humeral osteolysis were assessed using univariate and multivariate regression analyses. RESULTS: Cortical thinning and osteopenia occurred in 68 shoulders, a condensation line occurred in 37 shoulders, and spot weld occurred in 23 shoulders. In particular, greater tuberosity and calcar osteolysis occurred in 40 and 47 shoulders, respectively. Long stem, cementless stem, and a larger proximal filling ratio were independent predictors of cortical thinning and osteopenia, whereas a cementless stem, larger metaphysis diameter, and a larger proximal filling ratio were associated with proximal humeral osteolysis. CONCLUSIONS: The predictors of stress shielding and osteolysis included the use of long stems, cementless stems, larger proximal filling ratios, and larger metaphysis diameters. LEVEL OF EVIDENCE: retrospective comparative study (Level III).

Does previous arthroscopic Bankart repair influence coracoid graft osteolysis in Latarjet procedure? A case-control study with computed tomography scan data.

BACKGROUND: The Latarjet procedure is commonly performed in the treatment of recurrent shoulder instability and is also indicated as a salvage procedure for recurrence after failed arthroscopic Bankart repair. Although this procedure has shown success, there has been an increased awareness of complications in recent studies, especially graft osteolysis. Most relevant research has focused on the pathophysiology, incidence, or location of graft osteolysis or the risk factors for graft osteolysis; however, the data are limited to primary Latarjet procedures. This study aimed to investigate the effect of previous arthroscopic Bankart repair surgery on coracoid bone graft osteolysis in the Latarjet procedure. METHODS: This retrospective case-control study analyzed data from patients who underwent primary Latarjet procedures or revision Latarjet procedures following failed arthroscopic Bankart repair. Clinical outcome measures included range of motion, the Subjective Shoulder Value, and the Rowe score. Volumetric analysis of each transferred coracoid graft was performed using early postoperative and late postoperative computed tomography scan data, and the amount of graft osteolysis was then calculated as the percentage of volume reduction of each graft. RESULTS: A total of 32 patients who met the inclusion criteria were included in this study, with 24 patients in the primary Latarjet group (group I) and 8 patients in the revision Latarjet group (group II). The mean age of the patients was 32.5 ± 7.7 years, and the mean follow-up duration was 52.1 ± 8.9 months. Both study groups showed significant improvement in the Subjective Shoulder Value compared with baseline (P < .05). Comparison of postoperative clinical outcome measures showed no significant difference in any outcome parameter between the 2 study groups (P > .05). No recurrence was observed during the follow-up period. A positive apprehension sign was present in 6 patients (25%) in group I and 4 patients (50%) in group II (P > .05). Analysis of radiologic data revealed that all patients underwent some degree of graft osteolysis, with varying osteolysis ratios between 12% and 98%. The mean osteolysis ratio of the coracoid graft was 67.3% ± 22.6% in group I and 69.4% ± 25.6% in group II, with no significant difference between the 2 groups (P > .05). CONCLUSION: The findings of this study suggest that a considerable amount of coracoid graft osteolysis is observed after both primary Latarjet procedures and revision Latarjet procedures following failed arthroscopic Bankart repair. Previous arthroscopic Bankart repair did not seem to have a significant influence on the amount of graft osteolysis, and both primary and revision Latarjet procedures showed satisfactory clinical outcomes.

Ten Year Outcomes of Contemporary Total Hip Arthroplasty in Adolescent and Young Adult Patients are Favorable.

BACKGROUND: The purpose of this study was to assess 10-year patient-reported outcome measures, complications, polyethylene wear-rates, and implant survivorships in patients ≤30 years of age treated with contemporary total hip arthroplasty (THA). METHODS: We retrospectively assessed 121 patients (144 hips) who underwent THA at age ≤30 years (mean 23 [range, 11 to 30]) at an average follow-up duration of 10.7 years (range, 8 to 17). Highly-crosslinked polyethylene acetabular liners were used in all cases. Femoral heads were ceramic (74%) or cobalt-chrome (26%). There were 52 hips (36%) that had previous surgery and 31 hips (22%) were in patients who had associated major systemic comorbidities. We analyzed the modified Harris Hip scores, University of California Los Angeles Activity Scores, major complications, polyethylene wear-rates, and implant survivorships. RESULTS: At final follow-up, the average modified Harris Hip scores improved from 47 (±15.1) to 81 (±19.5) with an average 34-point improvement. The University of California Los Angeles scores improved from 4.0 (±2.3) to 6.0 (±2.4). The major complication rate was 5.6%. There were 6 hips (4.2%) that were revised. Indications for revision included instability (3, 2.1%), late infection (1, 0.7%), liner dissociation (1, 0.7%), and acetabular loosening (1, 0.7%). Mean linear (0.0438 mm/y) and volumetric (29.07 mm3/y) wear rates were low. No periprosthetic osteolysis was detected in any hip. Survivorship free from revision for any reason was 97.2, 95.8, and 95.8% at 5, 10, and 15 years. CONCLUSIONS: Contemporary THA in patients ≤30 years of age is associated with marked clinical improvements at 10-year follow-up and encouraging survivorship estimates at 15 years.

Impingement-related osteolysis in Motec total wrist arthroplasty: an explant analysis and review of the literature.

We present five cases of osteolysis in the Motec total wrist prosthesis, three around the radial implant, one around the metacarpal implant and one around both. Three of these were progressive and required revision, and biomechanical explant analyses of these revised prostheses were performed. Ex vivo testing of the contact points of the Motec implants was also performed at maximum extension. Here, impingement occurs between the metacarpal screw and the dorsal rim of the cup (non-articulating surfaces) with the short-necked prosthesis, leading to metacarpal screw damage, titanium debris formation and osteolysis. An analysis of three previously published cases suggests that this may have been the likely mode of failure in those cases. This complication is preventable by avoiding use of the short-neck prosthesis.Level of evidence: IV.

A review of wear debris in thumb base joint implants.

AIM: Polymers and metals, such as polyethylene (PE) and cobalt chrome (CoCr), are common materials used in thumb-based joint implants, also known as CMC (Carpometacarpal) arthroplasty. The purpose of this review was to investigate the reported failure modes related to wear debris from these type of materials in CMC implants. The impact of wear debris on clinical outcomes of CMC implants was also examined. Potential adverse wear conditions and inflammatory particle characteristics were also considered. METHOD: A literature search was performed using PRISMA guidelines and 55 studies were reviewed including 49 cohort studies and 6 case studies. Of the 55 studies, 38/55 (69%) focused on metal-on-polyethylene devices, followed by metal-on-metal (35%), and metal-on-bone (4%). RESULTS: The summarized data was used to determine the frequency of failure modes potentially related to wear debris from metals and/or polymers. The most commonly reported incidents potentially relating to debris were implant loosening (7.1%), osteolysis (1.2%) and metallosis (0.6%). Interestingly the reported mechanisms behind osteolysis and loosening greatly varied. Inflammatory reactions, while rare, were generally attributed to metallic debris from metal-on-metal devices. Mechanisms of adverse wear conditions included implant malpositioning, over-tensioning, high loading for active patients, third-body debris, and polyethylene wear-through. No specific examination of debris particle characterization was found, pointing to a gap in the literature. CONCLUSION: This review underscores the types of failure modes associated with wear debris in CMC implants. It was found that failure rates and adverse wear conditions of CMC implants of any design are low and the exact relationship between wear debris and implant incidences, such as osteolysis and loosening remains uncertain. The authors note that further research and specific characterization is required to understand the relationship between debris and implant failure.

Progressive Skull Osteolysis in the Setting of Endotine Implantation: A Case Report.

OBJECTIVES: To report a case of a 71-year-old woman who presented 8 years following 2 endoscopic brow lift procedures for evaluation of bony irregularities of her frontoparietal skull. To highlight a novel complication of Endotine fixation following an endoscopic brow lift procedure. METHODS: A chart review, bicoronal cranioplasty and a review of literature. RESULTS: The patient was satisfied with her post-surgical outcome and no complications were observed at the 1-month follow-up visit. A review of the literature revealed no previous reports of focal skull osteolysis relating to Endotine implants. CONCLUSION: We believe that our patient's focal calvarial osteolysis is a direct complication of Endotine fixation. Future research into the long-term effects of endoscopic brow lift procedures using Endotine implants is necessary to help ensure patient safety and guide future practices.

Excellent 20-Year Results of Total Hip Arthroplasty With Highly Cross-Linked Polyethylene on Cobalt-Chromium Femoral Heads in Patients ≤50 Years.

BACKGROUND: Highly cross-linked polyethylene (HXLPE) acetabular bearing surfaces have appeared to offer excellent wear resistance, low incidence of wear-related osteolysis, and high implant survivorship at 10-year to 15-year follow-up. However, concerns over potential performance deterioration at longer-term follow-up remain - particularly in younger patients - and outcome data into the third decade have not been available. METHODS: We retrospectively assessed 62 patients (68 hips) who underwent primary total hip arthroplasty (THA) at age ≤50 years with a single manufacturer's cementless components, remelted HXLPE liner, and small diameter (26 and 28 millimeter) cobalt-chromium (CoCr) femoral heads at minimum 18-year follow-up. We assessed clinical outcomes (modified Harris Hip score, University of California Los Angeles Activity Score, polyethylene wear rates, radiographic findings (osteolysis, component loosening), and implant survivorship. RESULTS: At 20.6-year mean follow-up (range, 18 to 23 years) modified Harris Hip scores for surviving hips remained an average of 41 points above preoperative baseline (49 versus 90, P < .001) and UCLA scores 2.8 points above baseline (3.7 versus 6.4, P < .001). Wear analysis revealed a population linear wear rate of 0.0142 mm/y (standard deviation (SD), 0.0471) and volumetric wear rate of 10.14 mm3/y (SD, 23.41). Acetabular lysis was noted in 2 asymptomatic hips at 16.6 and 18.4 years. No components were radiographically loose. Survivorship free from wear-related revision was 100% at 20 years (97% free from any revision). CONCLUSION: The HXLPE-CoCr bearing couple with small femoral heads continues to be extremely effective 20 years after primary THA in the younger patient population.

Failure of the linkage mechanism in a semi-constrained total elbow arthroplasty is a rare and unpredictable event: a review of seven cases.

PURPOSE: Linked component of total elbow arthroplasty (TEA) consisted of bushing and locking pins. Failure of linked components is a rare complication of TEA. This study aims to investigate the mechanism and consequence of failure of the linkage mechanism in TEA surgeries. METHODS: Between 2010 and 2021, five patients received revision operation due to linked component failure. Besides, two patients underwent primary operation at another institute were also analyzed due to failure of the linkage mechanism. RESULTS: All seven patients underwent primary TEA and mean age for primary TEA was 48 (range, 27-62). Two patients had TEA for post-traumatic arthritis, three patients for rheumatoid arthritis, and two patients for comminuted distal humerus fracture. The average time between primary TEA and revision TEA for linked component failure was 13.6 years. Three bushing wear and four locking pin dissociation were diagnosed according to pre-operative radiography. Elbow pain and swelling are the most common clinical symptoms. Severe osteolysis, periprosthetic fracture, and stem loosening were noted in three bushing wear cases. In four dissociation of locking pin cases, breakage of male locking pin phalanges was demonstrated in two patients. For revision procedures, both the locking pins and bushings were replaced. No patients in the study required additional surgery after the revision operation for linked component failure. CONCLUSION: Osteolysis, component loosening, periprosthetic fracture may be expected after linked component failure. Patients should be regularly followed up from short-term to long-term with radiography. Early diagnosis and intervention with linked component exchange can prevent extensive revision surgery.

Mean 23-Year Outcomes of Total Hip Arthroplasty Using a Modular Femoral Stem With Metaphyseal Fixation Sleeve.

BACKGROUND: Although the modular sleeve concept for femoral implants has several advantages, studies reporting on greater than 20-year outcomes are limited. This study aimed to report the mean 23-year results of total hip arthroplasty (THA) using a modular stem with metaphyseal fixation sleeve. METHODS: This study reviewed primary THAs performed using a modular stem between October 1994 and April 1998. Of the 272 hips (221 patients) identified, 220 hips (177 patients) satisfying the minimum 20-year follow-up were included. The Harris Hip Score was used for clinical evaluation. Final hip radiographs were analyzed to evaluate the implant stability and the extent of femoral osteolysis. The mean follow-up duration was 23 years (range, 20 to 28). RESULTS: The mean Harris Hip Score improved from 38 points (range, 26 to 67) preoperatively to 90 points (range, 71 to 100) at the final follow-up (P < .001). Femoral osteolysis was observed in 146 hips (67.1%), but 145 were located proximal to the osseo-integrated sleeve. Overall, 4 femoral revisions were performed; 2 for chronic infection, one for aseptic loosening, and one for periprosthetic femoral fracture. Of the 19 (8.6%) periprosthetic femoral fractures, the most common type was Vancouver AG (13 hips). One (0.5%) asymptomatic distal stem fracture occurred, while no complications were identified at the stem-sleeve junction. Implant survivorship free of any femoral revision was 98.3% at 23 years. CONCLUSIONS: A THA using a modular stem with metaphyseal fixation sleeve demonstrated 98.3% stem survivorship with excellent clinical outcomes at a mean follow-up of 23 years in non-obese patients.

Osteolysis After Augmented Scapholunate Ligament Reconstruction: A Report of 3 Cases.

CASE: Augmented scapholunate ligament reconstruction using polyether ether ketone anchors and ultra-high molecular weight polyethylene synthetic tape has the theoretical advantage of improved stability, avoidance of K-wire fixation, and the potential for earlier mobilization. We present 3 cases of scaphoid and lunate osteolysis/fragmentation, operative and histologic findings at reoperation, and the sequelae of this technique. CONCLUSION: If planning to use suture anchors and synthetic tapes in small carpal bones, we recommend advising patients about the risk of osteolysis and monitoring closely patients who complain of pain with motion after surgery.

The ceramic coated implant (CCI). Evolution total ankle replacements: a retrospective analysis of 40 ankles with 8 years follow-up.

Diminutive data is available on the outcome of several previously used total ankle replacement implants. The purpose of this study was to investigate the medium-term functional and radiological outcome and implant survival of the CCI Evolution implant. Consecutive series of 40 ankles operated in our hospital with primary TAR using the CCI Evolution implant in 2010-2013 were available for follow-up. The prospective clinical and radiographic data including the Kofoed score, subjective satisfaction and standard radiographs were collected preoperatively and at fixed time-points postoperatively. A CT was obtained in cases where osteolysis or loosening were suspected. The improvement of the Kofoed score and subjective satisfaction were statistically significant (p<0.0001). The implant survival was 97% (95% confidence interval (CI) 81%-100 %) at 5 years, and 81 % (95% confidence interval (CI) 60 %-92%) at 8 years. There were altogether 25 (64%) complications. Overall revision rate was 28% and failure rate 13%. The CCI implant outcome was not acceptable. The malposition of prosthetic components, subsidence, and peri-implant osteolysis were recorded often. Although the patient reported outcome measures improved, mostly due to positive changes in pain severity, overall revision and failure rates were high and comparable with previous findings of the CCI implant.